1. Home
  2. Docs
  3. H60 Gateway Manual
  4. Install H60 cables / modules
  5. 10 Rego 2000/3000: IVT, Bosch 2013-current

10 Rego 2000/3000: IVT, Bosch 2013-current

Install instructions for the IVT Geo XXX, Air X, Vent 202, Airbox and Bosch Compress 7000 LWM and AW systems.

Thank you for purchasing our interfacing solution for IVT/Bosch heat pumps. The interface is easy to install.

  • Power down the heat pump and open the front cover
  • Locate the 3,mm socket service connector.
    It can be traced by following the cable connected to the white terminal 23, 24 and 25 on the installer module marked with BBT.
  • Connect the cable with the 3,5mm plug from the interface to the service connector.
  • Plug in the interface module to the H60
  • Close the front cover of heatpump and power it up

How can we help?